"Do it yourself" Materials

10' runs of formed k-style aluminum gutters in your color choice.

Left and right end caps for the end of your gutter runs.

Hang fast 5-inch hangers with screw to fasting your gutter runs to the house. TIP: For areas with less snowfall place hangers ever 2-3 feet, for heavy snow areas place hanger 1-2 feet apart.

Splicers to connect your 10' gutter runs. Note: you need one splicer for every two gutter runs.

Inside and outside box miters to connect your gutter runs around the 90 degree turns on your project.

This sealant is perfect for sealing the end caps, box corners, outlets, and splicers.

10' 2x3 downspout sticks in your choice of color.

A-style elbows attach to the downspouts to push water away from the home. A-style elbows go on the face of the home as B-style elbows go on the side of the home.

The 2 3/8 inch round outlet is installed in the bottom of the gutter runs and the elbow is attached to this to enable water to drain.

The 45-degree 2x3 elbow offset is a great way to get around bricklayer on the side of buildings, or going over ledges on porches.

These tiny zip screws are essential for completely your project, use them to build downspouts, attach box miters, secure splicers, and fasten your downspouts to the straps on your building. 100 count per order in your color choice.

Don't forget your touch up paint to finish any blemishes or accidently scratches on your downspouts or gutter runs.

Downspout straps that fasten the downspout to the building, masonry screws supplied per request.